Tektronix TLA7AA Series, Service Manual

Page: 18 / 116

Preface
TLA7AXX/TLA7NAX Logic Analyzer Module Service Manual
xiii
The P6960 is a 34 channel single-ended high-density logic analyzer probe with
D-Max
t
probing technology. The P6960 is optimized for applications that
require the highest-density footprint for single-ended signals. The probe has
<
0.5
pF typical capacitance and can connect to circuit boards with thicknesses from
0.050 to 0.250 inches and supports HASL (hot air solder level), immersion gold,
and immersion silver board surface finishes. This probe is for use with
TLA7Axx/TLA7NAx logic analyzer modules.
The P6980 is a 34 channel differential high-density logic analyzer probe with
D--Max
t
probing technology. The P6980 is optimized for applications that
require the highest density footprint for differential signals. The probe has
<
0.5 pF typical capacitance and can connect to circuit boards with thicknesses
from 0.050 to 0.250 inches and supports HASL (hot air solder level), immersion
gold, and immersion silver board surface finishes. This probe is for use with
TLA7Axx/TLA7NAx logic analyzer modules.
This is a 34-channel general purpose probe used with the TLA7Axx/TLA7NAx
series logic analyzers. It provides support for single-ended, differential clocks,
and data with no trade-off in channels. It connects to a wide variety of probing
accessories including SMT KlipChips for quick connections to a variety of IC
pins and connectors.
This is a 34-channel differential probe used with the TLA7Axx/TLA7NAx series
logic analyzers. This probe is designed for use with differential clocks and
single-ended data. It uses a connector-less interface that use a compression
contact which is mechanically reliable and minimizes impact on board layout
and design. Adaptors are available to connect to Mictor probing interfaces.
This is a 34-channel high-density probe used with the TLA7Axx/TLA7NAx
series logic analyzers. This probe is designed for use with differential clocks and
data with no trade-offs in channels. It uses a connector-less interface that use a
compression contact which is mechanically reliable and minimizes impact on
board layout and design. Adaptors are available to connect to Mictor probing
interfaces.
Performance verification procedures confirm that a product meets or exceeds the
performance requirements for each of the published specifications.
This manual refers to any field-replaceable assembly or mechanical part
specifically by its name or generically as a replaceable part. In general, a
replaceable part is any circuit board or assembly that is listed in the replaceable
parts list near the end of this manual.
P6960 Logic Analyzer
Probe
P6980 Logic Analyzer
Probe
P6810 General Purpose
Logic Analyzer Probe
P6880 Differential Probe
P6860 High Density Probe
Performance Verification
Procedures
Replaceable Parts