Tektronix TLA 714, Service Manual

Page: 79 / 159

Removal and Installation Procedures
4–32
TLA 714 Color Portable Mainframe Service Manual
Handle
You will need a screwdriver with a size T-15 Torx tip and a small flat-bladed
screwdriver to allow you to remove the front panel trim ring prior to removing
the handle.
Set the mainframe so the bottom is on the work surface and the right side (the
side with the handle) faces you.
Do the Right Side Cover removal procedure, page 4–22.
Remove the two inner screws connecting the handle to the power supply. (See
Figure 4–16 on page 4–32) and then lift off the plastic handle mount and handle.
Remove inner screws (2)
Figure 4–16: Handle removal
Attach the handle and plastic handle mount to the power supply. Do the Right
Side Cover installation procedure as shown on page 4–22.
Removal
Installation