Tektronix TLA 704, Service Manual

Page: 32 / 144

Specifications
1–10
TLA 704 Color Portable Mainframe Service Manual
Table 1–8: Certifications and compliances: TLA 704 Color Portable Mainframe
EC Declaration of Conformity –
EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 55011 Class A Radiated and Conducted Emissions
EN 50081-1 Emissions:
EN 60555-2 AC Power Line Harmonic Emissions
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge Immunity
IEC 801-3 RF Electromagnetic Field Immunity
IEC 801-4 Electrical Fast Transient/Burst Immunity
IEC 801-5 Power Line Surge Immunity
Tektronix, Inc. claims compliance to EMC Directive 89/336/EEC for the following products when
used with the above named mainframes:
TLA 700 Series Logic Analyzer Modules (TLA 7L1, TLA 7L2, TLA 7L3, TLA 7L4, TLA 7M1,
TLA 7M2, TLA 7M3, TLA 7M4)
TLA 700 Series Digitizing Oscilloscope Modules (TLA 7D1, TLA 7D2, TLA 7E1, TLA 7E2)
EC Declaration of Conformity –
Low Voltage Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
Low Voltage Directive 73/23/EEC
EN 61010-1:/A2 1995 Safety requirements for electrical equipment for measurement,
control, and laboratory use
Approvals UL3111-1 – Standard for electrical measuring and test equipment
CAN/CSA C22.2 No. 1010.1 – Safety requirements for electrical equipment for measurement,
control and laboratory use
Installation Category Descriptions Terminals on this product may have different installation category designations. The installation
categories are:
CAT III Distribution-level mains (usually permanently connected). Equipment at this level is
typically in a fixed industrial location
CAT II Local-level mains (wall sockets). Equipment at this level includes appliances, portable
tools, and similar products. Equipment is usually cord-connected
CAT I Secondary (signal level) or battery operated circuits of electronic equipment
Conditions of Approval Safety Certifications/Compliances are made for the following conditions:
Temperature (operation): +5
_
C to +40
_
C
Altitude (maximum operation): 2000 meters
IEC Characteristics Equipment type:
Test and Measuring
Installation Category II
Pollution Degree 2
Safety Class I