Tektronix TDS 420A Programmer'S Manual Download

Page: 272 / 433

Command Descriptions

2–258

TDS Family Oscilloscope Programmer Manual

DELEte:WAVEform, SAVE:WAVEform:FILEFormat

SAVe:WAVEform <wfm>,{ REF<x> | <file path> }

<wfm>

SAVe

WAVEform

<Space>

REF

<x>

<wfm>

is CH<x>, MATH<x>, or REF<x>, and is the waveform that will be

saved.

REF<x>

is the location where the waveform will be stored.

(on instruments with the Options 1F or HD File System) is a

quoted string that defines the file name and path. Input the file path using the
form

<drive>

and one or more

<dir>

s are

optional. If you do not specify them, the digitizing oscilloscope will write the
file to the current directory.

stands for a filename of up to 8

characters followed by a period (“.”) and the proper 3-character extension.
Internal format waveforms use the “

WFM

” extension. The TDS 400A, 500C,

600B, and TDS 700C can also use a “

CSV

” extension for spreadsheet format files

or a “

DAT

” extension for MathCad format files.

The current directory refers to the name of a directory as returned by the
FILESystem:CWD query.

SAVE:WAVEFORM MATH2,REF1

saves the math 2 waveform in reference memory location 2.

SAVE:WAVEFORM MATH1,TEK00000.WFM

saves the math1 waveform to the file

TEK00000.WFM

in the default directory and

on the default drive.

SAVe:WAVEform:FILEFormat

Not on TDS 510A

Specifies the file format for saved waveforms.

Save and Recall

SAVE:WAVEform

Related Commands

Syntax

Arguments

Examples

Group

Related Commands

Summary of Contents for TDS 420A


















































































































































































































































































































































































































































Search results

Summary of Contents for TDS 420A

Reviews:

Related manuals for TDS 420A

Brands by name

Popular brands

Tektronix TDS 420A, Programmer'S Manual

Search results

Summary of Contents for TDS 420A

Reviews:

Related manuals for TDS 420A

Brands by name

Popular brands