manualshive.com logo in svg

Tektronix TDS 420A, Programmer'S Manual

Share
Download
Tektronix TDS 420A Programmer'S Manual Download Page 157

Command Descriptions

TDS Family Oscilloscope Programmer Manual

2–143

CENtronics

RS232

GPIb

:

PRInt

FILESystem

<file path>

,

<file path>

 is a quoted string that defines the file name and path. Input the file

path using the form 

<drive>/<dir>/<filename>

. 

<drive>

 and one or more

<dir>

s are optional. If you do not specify them, the TDS will print the file in the

current directory. 

<filename>

 stands for a filename of up to 8 characters and can

be followed by a period (“.”) and a 3-character extension.

The current directory refers to the name of a directory as returned by the
FILESystem:CWD command.

GPIb

 specifies that the hardcopy is sent out the GPIB port.

CENtronics

 specifies that the hardcopy is sent out the Centronics port (Option

13 RS232/Centronics Hardcopy Interface only).

RS232

 specifies that the hardcopy is sent out the RS232 port (Option 13

RS232/Centronics Hardcopy Interface only).

FILESYSTEM:PRINT TEK00000.IBM",CENTRONICS

sends the file named 

TEK00000.IBM

 out the Centronics port.

FILESystem:READFile

TDS 500C and 700C Only

Copies a named file to the GPIB port.

File system

FILESystem:READFile <file path>

:

FILESystem

<file path>

<Space>

READFile

<file path>

 is a quoted string that defines the file to read. Input the file path

using the form 

<drive>/<dir>/<filename>

. 

<drive>

 and one or more 

<dir>

s

are optional. If you do not specify them, the TDS will look for the filename in
the current directory.

The current directory refers to the name of a directory as returned by the
FILESystem:CWD query.

Arguments

Examples

Group

Syntax

Arguments

Summary of Contents for TDS 420A


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands