Operation
Creating a Frequency Mask
Use the Mask Editor to create a Frequency Mask. The mask is a set of points de
fi
ned by frequency and amplitude. Access
the Mask Editor from the Trigger control panel. (This procedure uses the Spectrum display.)
You can create a Frequency Mask by using either the manual or Auto Draw method. The following procedure explains the
manual method. For a procedure on how to use the Auto Draw method, see the topic
Mask Editor (Frequency Mask
Trigger)
in the online help.
1.
Click
Trig
to open the Trigger control
panel.
2.
Select the Event tab in the control panel.
3.
Set the Source to
RF Input
.
4.
Set the Type to
Frequency Mask
.
5.
Click
Mask Editor
to open the Mask
Editor.
The Mask Editor opens with the traces of
the Spectrum display in the graph.
6.
Click
New
in the tool bar. This removes
the existing mask and then creates a
default 6-point mask.
44
RSA6100A Series Quick Start User Manual
Summary of Contents for RSA6120A series
