Tektronix RSA6120A series, Quick Start User Manual

Page: 20 / 79

Installation
Options
You can add the following options to your spectrum analyzer:
Option 01 - Adds 10 MHz to 3 GHz Pre-Ampli fi er
Option 02 - Adds frequency mask triggering and RAM expansion
Option 05 - Adds digital IQ output and 500 MHz analog IF output
Option 06 - Adds a removable hard disk drive (not compatible with Option 07 or Option 08)
Option 07 - Adds a DVD±RW drive, no-cost option (not compatible with Option 06 or Option 08)
Option 08 - Adds a removable solid-state hard drive (not compatible with Option 06 or Option 07)
Option 11 - Adds Phase Noise and Jitter Measurement
Option 20 - Adds advanced signal analysis (including pulse measurements)
Option 21 - Adds general-purpose digital modulation analysis
Option 110 - Adds 110 MHz real-time capture bandwidth
Option 200 - Advanced DPX and Triggers
Option 1R - Adds Rackmount Kit
Operating Considerations
Power supply requirements
Source voltage and frequency Power consumption
100 – 240 V
RMS
, 50/60 Hz
115 V
RMS
, 400 Hz
450 W maximum (all models)
Environmental requirements
Characteristic Description
Operating temperature +5 °C to +50 °C (+5 °C to +40 °C; when accessing the DVD drive or optional
removable hard-disk drive)
Non-operating temperature -20 °C to +60 °C
Humidity 90% at 30 °C (non-condensing)
80% maximum when accessing the DVD drive
Maximum wet-bulb temperature 29 °C
Altitude:
Operating
Non-operating
Up to 3000 m (9843 ft)
12190 m (40,000 ft)
Cooling clearance
Bottom
Sides and back
20 mm (0.79 in)
50 mm (1.97 in)
RSA6100A Series Quick Start User Manual 3