Tektronix RSA6120A series, Quick Start User Manual

Page: 58 / 79

Operation
Power Triggering.
Power triggering triggers the instrument on time-domain signal characteristics. The incoming data is
compared to a user-selected level in dBm. You can select the time-domain bandwidth and trigger on the rising or falling edge.
In addition to de fi ning the trigger event, you can de fi ne the following parameters by selecting the appropriate tab in
the Trigger control panel:
Position and Delay parameters that de fi ne where a trigger occurs within the acquired data record and whether to
delay the trigger for a set amount of time.
Whether a single event can trigger an entire sweep, or each segment of the sweep requires a new trigger event in
swept acquisition mode.
RSA6100A Series Quick Start User Manual 41