Tektronix RSA5100B series, Technical Reference

Page: 38 / 153

Specifications
Atten = 0 dB
Pulse width
≥ 300 ns.
PRI ≤ 300 us.
Duty cycle ≥ 0.001
Absolute Frequency Error determined over center 50% of pulse.
13
For conditions of:
Linear Chirped pulses
For signal type: Linear Chirp, Peak-to-Peak Chirp Deviation:
≤ 0.8 x Measurement BW.
Frequency Estimation = Manual
Pulse ON power
≥ –20 dBm
Signal peak at Ref Lvl.
Atten = 0 dB
Pulse width
≥ 100 ns.
PRI ≤ 300 us.
Duty cycle ≥ 0.0003
t
meas
– t
reference
≤ 10 ms
Absolute Frequency Error determined over center 50% of pulse.
14
For conditions of:
Linear Chirped pulses
For signal type: Linear Chirp, Peak-to-Peak Chirp Deviation:
≤ 0.8 x Measurement BW.
Frequency Estimation = Manual
Pulse ON power
≥ –20 dBm
Signal peak at Ref Lvl.
Atten = 0 dB
Pulse width
≥ 300 ns.
PRI ≤ 1000 us.
Duty cycle ≥ 0.0003
t
meas
– t
reference
≤ 10 ms
Absolute Frequency Error determined over center 50% of pulse.
Table 18: Impulse response
Characteristic Description
15 to 40 dB Impulse Response Measurement Range
(nominal)
Across the width of the chirp
±2 dB
1 Impulse Response Measurement
Accuracy (nominal)
For a signal 40 dB in amplitude and delayed 1% to 40% of the chirp width
Impulse Response Weighting Taylor Window
1 Chirp width 100 MHz, pulse width 10 μ s, minimum signal delay 1% of pulse width or 10/(chirp bandwidth), whichever is greater, and minimum 2000 sample
points during pulse on-time.
24 RSA5100B Series Technical Reference