Tektronix RSA5100B series, Technical Reference

Page: 35 / 153

Specifications
Table 17: Pulse measurements, typical (cont.)
Characteristic Description
Chirp Frequency Linearity
(Absolute Frequency Error RMS)
60 MHz BW
13
20 MHz BW
14
2 GHz ±25 kHz ±3 kHz
10 GHz ±30 kHz ±3 kHz
20 GHz ±30 kHz ±5 kHz
85 MHz BW 13 25 and 40 MHz BW 14
2 GHz ±25 kHz ±5 kHz
10 GHz ±30 kHz ±8 kHz
20 GHz ±30 kHz ±10 kHz
125, 160 MHz BW 13
2 GHz ±35 kHz
10 GHz ±40 kHz
20 GHz ±40 kHz
1 For conditions of:
CW (non-chirped) pulses
Frequency Estimation = Manual
Pulse ON power
≥ –20 dBm
Signal peak at Ref Lvl.
Atten = 0 dB
Pulse width
≥ 200 ns.
PRI ≤ 300 us.
Duty cycle ≥ 0.0007
t
meas
– t
reference
≤ 10 ms
Measurement time position excludes the beginning and ending of the pulse extending for a time = (10/measurement Bandwidth) as measured from the
50% point of the Tr or Tf.
2
For conditions of:
CW (non-chirped) pulses
Frequency Estimation = Manual
Pulse ON power
≥ –20 dBm
Signal peak at Ref Lvl.
Atten = 0 dB
Pulse width
≥ 300 ns.
PRI ≤ 300 us.
Duty cycle ≥ 0.001
t
meas
– t
reference
≤ 10 ms
Measurement time position excludes the beginning and ending of the pulse extending for a time = (10/measurement Bandwidth) as measured from the
50% point of the Tr or Tf.
3 CW (non-chirped) pulses
Frequency Estimation = Manual
Pulse ON power
≥ –20 dBm
Signal peak at Ref Lvl.
Atten = 0 dB
Pulse width
≥ 1 μ s.
PRI ≤ 300 us.
RSA5100B Series Technical Reference 21