![background image](http://html1.mh-extra.com/html/tektronix/rfm220/rfm220_user-manual_1078313070.webp)
Operating Basics
Only one Aggregator should monitor an RFM220 instrument at a time.
The Aggregator can communicate with up to 10 instruments at a time, but
an individual instrument can communicate with only one Aggregator at
a time.
NOTE.
In the case where more than one Aggregator has connected to an
RFM220 instrument, only the last Aggregator to connect to the instrument will
receive SNMP trap messages from the instrument.
The Aggregator requires access to the Con
fi
guration.xml
fi
le in order to
operate. This
fi
le sets the parameters that control the communications
between the different components of the RFM220 system. You must
con
fi
gure this
fi
le before you can operate the RFM220 system. (See
If the Con
fi
guration.xml
fi
le is lost or deleted, the Aggregator will not be
able to start or operate. The default location of the Con
fi
guration.xml is
as follows. The location will be different if you installed the Aggregator
software to a location other than the default location.
Windows 7:
C:\Program Files (x86)\Tektronix\RFM220\RFM220
Aggregator\Con
fi
guration.xml
Windows XP systems:
C:\Program Files\Tektronix\RFM220\RFM220
Aggregator\Con
fi
guration.xml
A replacement copy of the default
fi
le is located on the
RFM220
Software and Documentation CD
that was shipped with the product. It is
recommended that you save a backup copy of the Con
fi
guration.xml
fi
le
after you con
fi
gure your system.
On Windows 7 systems, the user who has logged on as the Administrator
must have Full Access privileges.
44
RFM220 User Manual
Summary of Contents for RFM220
