![background image](http://html1.mh-extra.com/html/tektronix/rfm220/rfm220_user-manual_1078313048.webp)
Getting Started
Con
fi
guring the
RFM220 Aggregator
The RFM220 Aggregator is con
fi
gured using the Con
fi
guration.xml
fi
le, which
contains various user-de
fi
ned parameters that control the communications
between the three components of the RFM220 system: instrument,
Aggregator, and Client. Consult with your local network administrator before
setting these parameters.
Con
fi
guration change requirements.
The Con
fi
guration.xml
fi
le can be
updated dynamically. This means that after the
fi
le has been initially set up
during the installation process, the
fi
le can be updated while the Aggregator
is running. The Aggregator will automatically load the parameters from the
updated Con
fi
guration.xml
fi
le when changes to the
fi
le are saved.
CAUTION.
The RFM220 software will not work properly if you have more
than one RFM220 Aggregator monitoring an RFM220 instrument at a time.
The Aggregator can communicate with multiple instruments at a time, but an
individual instrument can only communicate with one Aggregator at a time.
In the case where more than one Aggregator has connected to an
RFM220 instrument, only the last Aggregator to connect to the instrument will
receive SNMP trap messages from the instrument.
The RFM220 system requires the Con
fi
guration.xml
fi
le in order to operate.
It is recommended that you backup this
fi
le to a safe location. A copy of the
default
fi
le is located on the RFM220 Software and Documentation CD that
was shipped with the product.
After a con
fi
guration change, the Aggregator requires approximately 2
minutes to recon
fi
gure for each instrument listed in the Con
fi
guration.xml
fi
le.
To prevent software problems, you should wait at least 2 minutes after saving
a change for each instrument listed in the
fi
le before you make additional
changes to the Con
fi
guration.xml
fi
le. For example, if 5 instruments are listed
in the
fi
le, you should wait 10 minutes before making additional changes.
22
RFM220 User Manual
Summary of Contents for RFM220
