![background image](http://html1.mh-extra.com/html/tektronix/rfm220/rfm220_user-manual_1078313065.webp)
Getting Started
CAUTION.
When you use the RFM220 Client to connect to a
RFM220 instrument, the software does a version check to verify that the
fi
rmware version installed in the instrument and the software versions of the
RFM220 Aggregator and RFM220 Client are all compatible.
If they are not compatible, an error message will be displayed and you will not
be able to connect to the RFM220 instrument until the software or instrument
fi
rmware is upgraded to a compatible version.
3.
After you enter the IP address or device name in the Aggregator box, click
Find Devices
. The IP addresses, device names, and status for all of the
RFM220 instruments being monitored by the selected Aggregator will be
displayed in the Monitored Devices list.
NOTE.
If a RFM220 instrument is added to the Aggregator after you click
Find Devices, you must click Find Devices again to see the additional
instrument in the monitored devices list.
The following illustration shows a device name being used to connect to a
RFM220 Aggregator, which is monitoring two RFM220 instruments.
Figure 22: RFM220 Client login window showing two monitored devices
RFM220 User Manual
39
Summary of Contents for RFM220
