High Speed Logger Application
Meas Spacing
The measurement spacing window allow you to de
fi
ne the time between
measurements as follows:
Fast as possible: Measures at about 350
μ
s per point on most computers.
Some computers will be faster, some slower. However, many other factors
may affect this rate. Virtually any loading on the computer may reduce the
rate of measurement. The magnitude of the effect is a function of the power
of the computer and the demands of the competing applications.
Delay between points (in milliseconds): Set this value to that a delay in the
prescribed number of points causes a stop in measurement. As stated above,
many factors can negatively impact this rate. Again, these affects tend to be
modest in most cases and pose little concern. In addition, the resolution and
accuracy of the computer clock will have some effect.
Make a Simple Measurement
The following information outlines how to make some simple measurements
using this application. These procedures assume that a single instrument is
connected and that you have installed the appropriate applications.
1.
Start the High Speed Logger Application, selecting
Yes
to initialize the
instrument.
2.
Select the
Data Storage
tab and click the
Browse...
button. Select Desktop
(your desktop) and then click
OK
.
3.
Enter
TestFile
into the
File Name
text box.
58
RF and Microwave Power Sensors/Meters
Summary of Contents for PSM3000 Series
