High Speed Logger Application
High Speed Logger Application
NOTE.
This application is available for all instrument models.
NOTE.
Using more than one type of application at a time can result in errors. It is
recommended that you use only one type of application at a time.
CAUTION.
Do not 23 dBm, 200 mW, or 3.15 VRMS. Ensure that the RF
input connector on the sensor and the mating connector are clean and undamaged.
When you
fi
rst open the High Speed Logger Application, a window will appear
asking if you would like to initialize the instrument. Select
Yes
. If you have
multiple instruments connected, select an instrument by clicking on the instrument
name, and then click
Initialize Sensor
. The default view will look similar to
the following image. (See Figure 6.)
Figure 6: High Speed Logger application window
52
RF and Microwave Power Sensors/Meters
Summary of Contents for PSM3000 Series
