Tektronix MTS400 Series, Quick Start User Manual

Page: 23 / 96

Installation
Installation
Before Installation
Perform the following product inspection procedure when you receive your instrument.
1. Inspect the shipping carton for external damage, which indicates possible damage to the instrument.
2. Remove the MTS400 Series instrument from the shipping carton.
3. Check that the instrument has not been damaged in transit. The exterior should not have any scratches or impact marks.
Before shipment, the instrument is thoroughly inspected for mechanical defects.
NOTE. Save the shipping carton and packaging materials for instrument repackaging in case shipment becomes necessary.
(See page 70, Repackaging for Shipment.)
4. Verify whether you received the standard accessories and any optional accessories that you ordered. (See page 66,
Accessories .)
5. Perform the functional check procedure after installing the instrument. The functional check procedure is located in the
MTS400 Series MPEG Test Systems Speci fi cations and Performance Veri fi cation Technical Reference document.
Operating Considerations
The following table lists the electrical operating requirements for the MTS400 Series systems. The complete electrical
operating requirements of the MTS400 Series instruments are listed in the
MTS400 Series MPEG Test Systems
Speci fi cations and Performance Veri fi cation Technical Reference .
Table 1: Electrical operating requirements
Requirement Speci fi cation
Operating temperature + 5 °C to + 40 °C
Operating altitude 0 to 3000 m (9800 ft)
Source Voltage 100 to 240 VAC ≥ 10% (90 to 264 VAC RMS)
Frequency range 50/60 Hz
Maximum Power Consumption 4 Amps
Inrush Surge Current 13 A at 240 VAC, 50 Hz
4.8 A peak at 100 VAC, 60 Hz
Fuse rating T6.3AH, 250 V, Fast; not operator replaceable. Refer servicing to quali fi ed service
personnel
Overvoltage category II (as de fi ned in IEC 61010-1)
Pollution degree
2 (as de fi ned in IEC 61010-1). Rated for indoor use only
MTS400 Series Quick Start User Manual 1