Required equipment
The following table lists the required equipment to perform the functional checks.
Equipment
Minimum
requirements
Example
Purpose
Pattern generator
Bit rate ≥ 16 Gb/s
Rise/fall time ≤ 20 ps
20% to 80%
≥800 mV
P-P
Pattern: 1010
Tektronix BSA175,
BSA286C, or
equivalent
Apply a test signal to
the linear equalizer
Sampling oscilloscope 50 GHz minimum
bandwidth
Tektronix DSA8300
with 80E108 or 80E11
modules installed, or
equivalent
Check rise time and
signal fidelity
Phase-matched cable
set
2.92 mm, <2 ps
matching, I m
maximum
Tektronix pn
(174-5969-00),
standard part of LE160/
LE320
6 in. coaxial cable
2.92 mm, flex K-male to
K-male
Tektronix pn
(174-6362-00),
standard part of LE160/
LE320
Functional setups
Complete the functional setups before proceeding with the Warranted
Characteristic tests.
Performance verification
8
LE160 & LE320 Specifications & Performance Verification
Summary of Contents for LE160
