KPCI-488LPA GPIB Controller Interface Card Quick Start Guide
KPCI-488LPA-903-01 Rev. B /
January 2020
11
To use the diagnostic tool:
1.
From Windows, select
Start
>
All Programs
.
2.
From the programs selection, select
Keithley Instruments
>
KI-488 Diagnostic Tool
. The KI-488
Diagnostic Tool window will open.
Figure 9: KI-488 Diagnostic Tool
To initialize your GPIB interface accessory:
1.
Select
Initialize KI GPIB
. The Initialize GPIB Interface Board dialog is displayed.
You must select
Initialize KI GPIB
before communicating with your instrument using the KI-488
Diagnostic Tool. To initialize the communication interface, select a GPIB address that is not assigned
to any instrument connected to your GPIB bus.