KPCI-488LPA GPIB Controller Interface Card Quick Start Guide
KPCI-488LPA-903-01 Rev. B /
January 2020
3
5.
The driver installation dialog window opens, as shown in the following figure.
Figure 2: KUSB-488 driver installation screen
6.
Install one of the following drivers. The InstallShield Wizard provides guidance on which driver to install.
NI command-compatible driver (32- or 64-bit)
Keithley command-compatible driver (32-bit)
You can install either a Keithley command-compatible driver or an NI command-compatible driver.
See the
Models KPCI-488LPA and KUSB-488B Reference Manual
(part number KI488-901-01) for
the available functions of each driver.
For LabVIEW™ and LabWindows/CVI™ support, Keithley Instruments recommends that you install
the NI command-compatible driver. For LabVIEW programming, you can also install the LabVIEW
GPIB virtual instruments (VIs) that are optimized for use with the KPCI-488LPA.
For ACS and ACS Basic support, install the Keithley command-compatible driver.
To use VISA or an application that uses VISA (such as KickStart Instrument Control Software), install
either driver.
7.
Follow the prompts to complete the setup procedure.
8.
When the installation finishes, select
Yes
to restart your system.