KPCI-488LPA GPIB Controller Interface Card Quick Start Guide
KPCI-488LPA-903-01 Rev. B /
January 2020
9
Using the Keithley GPIB Configuration Utility
The Keithley GPIB Configuration Utility allows you to configure the following settings:
KPCI-488LPA bus address
Bus timing
I/O timeout
Set the KPCI-488LPA to be a system controller
Enable autopolling
To launch the configuration utility:
1.
From Microsoft Windows, select
Start
>
All Programs
.
2.
From the programs selection, select
Keithley Instruments > KI-488 > KI-488 Configuration Utility
. The
Keithley GPIB Configuration Utility window will open. The utility queries the GPIB bus for instruments and
displays the response to the identification query for any discovered instruments.
Figure 7: Keithley GPIB Configuration Utility