Safety
Unpack
Connect
FAQs
Next steps
Introduction
Test
The power cord supplied with 2380-500-15/2380J-500-15/2380-120-
60/2380J-120-60 contains a separate protective earth (safety ground)
wire for use with grounded outlets. When proper connections are
made, the instrument chassis is connected to power-line ground
through the ground wire in the power cord. In addition, a redundant
protective earth connection is provided through a screw on the rear
panel. This terminal should be connected to a known protective
earth. In the event of a failure, not using a properly grounded
protective earth and grounded outlet may result in personal injury or
death due to electric shock.
Do not replace detachable mains supply cords with inadequately
rated cords. Failure to use properly rated cords may result in
personal injury or death due to electric shock.
To connect line power:
1.
Turn POWER OFF (use front panel power switch).
2.
Move the line voltage selector, on the rear panel, to the correct
voltage level (230 V or 115 V).
3.
Connect the power cord to the AC socket on the rear panel.
Operating the instrument on an incorrect line voltage may cause
damage to the instrument, possibly voiding the warranty.
4.
Connect the other end of the power cord to a grounded AC
outlet.
5.
Turn
POWER
ON (use the front panel). The instrument is
powered up.
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
