Install the instrument
You can use a Model 2380-500-15/2380J-500-15/2380-120-
60/2380J-120-60 instrument on a bench or in a rack. Please see the
instructions that came with your rack-mount kit if you are installing
the programmable DC electronic load in a rack.
To prevent damaging heat build-up and ensure specified performance,
make sure there is adequate ventilation and air flow around the
instrument to ensure proper cooling. Do not cover the ventilation
holes on the top, sides, or bottom of the instrument.
Make sure the instrument is positioned so that it is easy to reach any
disconnecting devices, such as the power cord and the power switch.
Power up the instrument
The Model 2380-500-15/2380J-500-15/2380-120-60/2380J-120-60
instrument operate at 100 V, 115 V, 220 V, or 230 V with a
frequency of 50 Hz or 60 Hz. Make sure that the AC line voltage
indicator in the center of the rear-panel power module matches the
AC line voltage in your facility as shown in the next figure.
北京海洋兴业科技股份有限公司（证券代码：839145）
www.hyxyyq.com
