Tektronix Keithley 2268 Series, Reference Manual

Page: 231 / 253

Series 2268 850 Watt DC Power Supplies Reference Manual SCPI Command Reference
2268S-901-01 Rev. A / January 2015 229
Function SCPI Command Description
Parameter and
Range
Query
Recall *RCL OR
[:]SYSTem[<channel>]:RECall
<setting_location>
Recall a User Memory
Setting. See *SAV below. <Setting Index (1–
5)> N/A
Reset
*RST
[:]SYSTem[<channel>]:RESet
Resets all values to default
state (excluding calibration
data). This command takes
longer to execute than other
commands. Be sure to allow
extra time for the command
to run before sending another
command (approximately
two seconds). N/A
Save User
Settings *SAV
[:]SYSTem[<channel>]:SAVE
<setting location>
Save a User Memory Setting. N/A
Query Service
Request Enable *SRE?
[:]STATus[<channel>]:SREQuest:ENABle? Service Request Enable
Query Yes
Service
Request Enable *SRE
[:]STATus[<channel>]:SREQuest:ENABle
<status-enable>
Service Request Enable
Command <Enable Flags(0–
255)> N/A
Read Status
Byte *STB?
[:]STATus[<channel>]:SBYTe[EVENt]? Read the status byte. Yes
Trigger *TRG Trigger system N/A
Self-Test
Query *TST?
[:]SYSTem[<channel>]:TEST? Perform unit Self Test
(Pass=0). Yes
Wait To
Continue *WAI
[:]SYSTem[<channel>]:WAIT Wait to continue command. N/A