Series 2268 850 Watt DC Power Supplies Reference Manual
LAN/Ethernet Setup and Communication
2268S-901-01 Rev. A / January 2015
187
Figure 80: I/O Settings
The Configuration for Serial Settings and Flow Control Settings should be the same as
the preceding figures. In the I/O settings, check the Enable Termination Character and
choose
Carriage Return - \r
in the drop down menu for Termination Character. Click
Apply Changes.
Click
Input/Output
to begin communicating with the unit.
Verify after every command sent that you are also using the correct termination
character which in this case is
\r.
Figure 81
Verifying Correct Termination Character
Summary of Contents for Keithley 2268 Series
Page 102: ......