Remote Operation
Series 2268 850 Watt DC Power Supplies Reference Manual
120
2268S-901-01 Rev. A / January 2015
This is the COM port that you have your serial cable hooked up to or in the case of USB
the one that was configured to be used in the FDTI software.
5.
Click OK when done.
6.
Setup the data format to be used. See “Data Format” on page 119 for details.
7.
Set up the Hyper terminal you will need to configure the properties.
8.
Click
File>Properties
to bring up the connection properties dialog and click on
the Settings tab.
Figure 51: USB Settings
9.
Fill out the following selections in the connection properties dialog:
Terminal keys
Ctrl+H, Space, Ctrl+H.
On the Emulation list, select ANSI.
10.
Click on the ASCII Setup button to bring up the ASCII Setup dialog.
Summary of Contents for Keithley 2268 Series
Page 102: ......