Iris Packet Broker (IPB) 7.13.2
45
Hardware Installation and Maintenance Guide
6
IPB Maintenance Guidelines
Rev. 001-140228
Removing the IPB220 Chassis Module Air Filter
Perform the following steps to remove the IPB220 chassis module air filter. You can remove
the air filter while the unit is still powered on.
Step
Action
1.
Loosen the retention thumbscrew in the center of the chassis module and
slightly pull out the air filter tray (
Figure 6.4 - IPB Chassis Air Filter Removal
2.
Remove the filter from the tray.
3.
When visible dust is present, clean the filter by vacuuming the filter or gently
rinsing with cold water.
4.
Once dry, reinstall the filter.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
