Tektronix IBP420 Hardware Installation And Maintenance Manual Download Page 10

Page: 10 / 50

Iris Packet Broker (IPB) 7.13.2

Hardware Installation and Maintenance Guide

IPB Hardware Reference

Rev. 001-140228

Maximum ports

24, up to 16

ports have

advanced

features

64 1G/10G and/or

16 40G

Integration with GeoProbe platform family

G10 only

1G or 10G Ethernet port



40G Ethernet port



Time & Port Stamping



Option to disable time and port stamping on egress



Within a GTP tunnel, L3 and L4 Filtering, 10G



Microburst Protection (High Data Burst Buffer)



Protocol/Tag Stripping (GTP, VLAN, MPLS)



vMesh over IP (Interconnect IPB over TCP/IP)



Table 2.1 - IPB Feature Support per Model (Continued)

Feature

IPB Model

IPB220

Base

IPB220

Advanced

IPB420

Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited

Summary of Contents for IBP420



















































Search results

Summary of Contents for IBP420

Reviews:

Brands by name

Popular brands

Tektronix IBP420, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for IBP420

Reviews:

Brands by name

Popular brands