![background image](http://html1.mh-extra.com/html/tektronix/ibp420/ibp420_hardware-installation-and-maintenance-manual_1077611029.webp)
Iris Packet Broker (IPB) 7.13.2
27
Hardware Installation and Maintenance Guide
3
IPB Installation
Rev. 001-140228
8.
Connect an Ethernet cable from Management Port 1 to the LAN/WAN (
Make sure the switch/router is set to Auto/Full for negotiation.
If timing other than NTP
will be used, extra cabling is required. Contact TekComms for assistance.
Figure 3.7 - IPB Rear Panel (AC Unit Shown)
9.
Contact Tektronix Communications customer support to connect the IPB to the Iris
server.
10.
Select Access Control from the main menu. The following page appears (
).
Figure 3.8 - IPB Access Control Page
11.
For maximum security, configure the IPB to allow only these interfaces:
Serial
SSH
HTTPS
LCD/Front Panel
12.
Change the password for the admin user.
DO NOT delete or rename the default admin
account.
13.
Notify Tektronix of the following information:
IP address of unit for final configuration
New password for the admin user
14.
Click
Submit
.
Management
Port
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited