![background image](http://html1.mh-extra.com/html/tektronix/ibp420/ibp420_hardware-installation-and-maintenance-manual_1077611033.webp)
Iris Packet Broker (IPB) 7.13.2
31
Hardware Installation and Maintenance Guide
3
IPB Installation
Rev. 001-140228
4.
IPB Ingress and Egress Port settings appear in the IPB Ports tab based on their
configured Port Settings in the IPB GUI. Refer to
and the
IPB
Software User Guide
for details.
Ingress
ports are the equivalent of
span
ports with Time and Port stamping enabled
in the IPB GUI. Both IPB220 and IPB420 devices can have ingress ports appear in
Iris Admin.
Egress
ports are the equivalent of
monitor
ports with TekComms format port
stamping enabled. Only IPB420 devices can have egress ports appear in Iris Admin.
5.
Create physical links for the IPB device. The IPBs are available in the Probe Selection
drop-down menu as shown in
.
When you select an IPB device, the ingress ports of the IPB appear in the Physical
Device Ports area (
).
Figure 3.13 - Iris Admin Topology Tab - Physical Links Pane
6.
Click the Physical Device Port check box and click
Save
.
7.
The IPB port settings on the Probes tab displays the configured physical link in the
Member Of column of the Ingress ports area (
Figure 3.14 - Iris Admin Probes Tab - Physical Link Assigned for IPB
Select an IPB from
Probe drop-down
menu
IPB Ingress Ports
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited