Getting Acquainted with the Oscilloscope
1.
TekVPI external power supply connector. Use the connector for the TekVPI
external power supply (Tektronix part number 119
‑
7465
‑
XX) when additional
power is needed for TekVPI probes.
Rear-Panel Connectors
1.
LAN
. Use the LAN (Ethernet) port (RJ-45 connector) to connect the
oscilloscope to a 10/100 Base-T local area network. The port is available on
the optional connectivity module (DPO2CONN).
2.
Lock
. Use to secure the oscilloscope and optional connectivitiy module.
3.
Video Out
. Use the Video Out port (DB-15 female connector) to show the
oscilloscope display on an external monitor or projector. The port is available
on the optional connectivity module (DPO2CONN).
4.
USB 2.0 Device port
. Use the USB 2.0 Full Speed Device port to connect
a PictBridge compatible printer, or for direct PC control of the oscilloscope
using USBTMC protocol.
NOTE.
The cable connected from the USB 2.0 Device port to the host computer
must meet the USB2.0 speci
fi
cation for high speed operation when connected to
a high speed host controller.
5.
Power
input. Attach to an AC power line with integral safety ground.
32
MSO2000B and DPO2000B Installation and Safety Instructions
