Getting Acquainted with the Oscilloscope
Using the Menu Buttons
Use the menu buttons to perform many functions in the oscilloscope.
1.
Measure
. Push to perform automated measurements on waveforms or
to con
fi
gure cursors.
2.
Search
. Push to search through an acquisition for user-de
fi
ned events/criteria.
3.
Test
. Push to activate advanced or application-speci
fi
c testing features.
4.
Acquire
. Push to set the acquisition mode and adjust the record length.
5.
Autoset
. Push to perform an automatic setup of oscilloscope settings.
6.
Trigger Menu
. Push to specify trigger settings.
7.
Utility
. Push to activate the system utility functions, such as selecting a
language or setting the date/time.
8.
Save / Recall Menu
. Push to save and recall setups, waveforms, and screen
images to internal memory, or a USB
fl
ash drive.
9.
Channel
1
,
2
,
3
, or
4 Menu
. Push to set vertical parameters for input
waveforms and to display or remove the corresponding waveform from the
display.
10. B1
or
B2
. Push to de
fi
ne and display a serial bus if you have the appropriate
module application keys. The DPO2AUTO module supports CAN and LIN
buses. The DPO2EMBD module supports I
2
C and SPI. The DPO2COMP
module supports RS-232, RS-422, RS-485, and UART buses.
Parallel bus support is available on MSO2000B products.
Also, push the
B1
or
B2
button to display or remove the corresponding bus
from the display.
26
MSO2000B and DPO2000B Installation and Safety Instructions
