Designing an Interface Between a DAS MTIF and a SUT
DAS MTIF Instructions
9
9.02 mm
(.355 in)
28.20 mm
(1.110 in)
19.18 mm
(.755 in)
10.16 mm
(.400 in)
7.62 mm
(.300 in)
5.08 mm
(.200 in)
2.54 mm
(.100 in)
2.92 mm
(.115 in)
.81 mm
(.032 in)
0.85 mm
(.0335 in)
18X 0.64 mm
(.025 in)
19X 0.43 mm
(.017 in)
2.28 mm
(.090 in)
1.78 mm (.070 in)
2.80 mm
(.110 in)
1.40 mm
(.055 in)
.56 mm
(.022 in)
.28 mm
(.011 in)
1.35 mm
(.053 in)
2X 1.35 mm dia.
(.053
"
.003)
Plated through
2X 1.40 mm dia. (.055 in)
Pad both sides
5X .99 mm dia.
(.039
"
.003)
Plated through
2X Solder pads
both sides
3.73 mm
(.147 in)
Pin 1
Board edge
19X Contact pads
both sides
Figure 7: Straddle-mounted connector layout (component side)
Figure 8 shows the pin assignments for the surface-mounted connector. Pin
assignments are the same for the straddle-mounted connector.
Pin 1
Pin 19
Pin 38
Pin 20
Figure 8: Pin assignments for a Mictor connector (component side)