6
DAS MTIF Instructions
Designing an Interface Between a DAS MTIF and a SUT
This section provides you with some guidelines for designing your own DAS
MTIF interface on the SUT. The guidelines contain information on the following
topics:
H Mictor connectors and latch housings
H Dimensions and placement of connectors
H Mechanical layout and pinout of connectors
H Loading and equivalent circuits
H Probe channel assignments
Mictor Connectors and Latch Housings
The DAS MTIF probe contains a 38-pin Mictor connector. Table 1 lists Mictor
connectors you can purchase from AMP, Inc. that are compatible with the probe.
Table 1: Compatible Mictor connectors
AMP part
number
Description
767054-1*
Palladium-nickel plated, 0.054 inch long ground pins, surface mount connector
2-767004-2 30 microinches gold plating, 0.054 inch long ground pins, surface mount connector
767044-1*
Palladium-nickel plated, straddle mount connector (0.062 inch circuit board
thickness)
*
Recommended
You can contact AMP for more detailed information on the Mictor connectors.
For the address, refer to the Replaceable Parts section.
You can purchase latch housing mechanisms to use with Mictor connectors. The
latch housing surrounds the Mictor connector in your SUT and provides positive
retention of the DAS MTIF probe.
NOTE
. Refer to the Optional Accessories list in the Replaceable Parts section for
information on ordering surface-mounted or straddle-mounted latch housings.