Tektronix CSA7404B, User Manual

Page: 207 / 438

CSA7000B Series & TDS7000B Series Instruments User Manual
3- 139
Measuring Waveforms
The instrument comes equipped with cursors and automatic measurements to
assist you in analyzing your waveforms. This section describes these tools and
how you use them:
H
Taking Automatic Measurements, on page 3--140, describes how you can
setup the instrument to automatically measure and display a variety of
waveform parameters. See Figure 3--34.
H
Taking Cursor Measurements,
on page 3--151, describes using cursors to
make measurements on waveforms. See Figure 3--34.
H
Taking Histograms, on page 3--157, describes how to take histograms to
view the horizontal or vertical distribution of data on your waveforms.
H
Optimizing Measurement Accuracy , on page 3--160, tells you how to run
compensation routines and how to deskew channels to optimize the accuracy
of your measurements.
NOTE
. You can also make graticule measurements, counting graticule divisions
and multiplying them by the vertical or horizontal scales set for the waveform
that you are measuring.