Tektronix BERTScope, Quick Start User Manual

Page: 20 / 42

Installation
The following optional accessories are available for your product:
Accessory Description
CR125ACBL High-performance delay matched cable set (required for BERTScope Analyzer and
Clock Recovery instrument in SSC applications)
100PSRTFILTER 100 ps rise time fi lter
BSA12500ISI Differential ISI board
PMCABLE1M Precision phase-matched cable pair, 1 m
SMAPOWERDIV SMA power dividers
BSASATATEE BSA-SATA-Tee for OOB Signaling
SATATESTSW Serial ATA Interop Test Suite automation software
BSARACK BSA rack mount kits
Options
The following options are available for your product.
Option Description CR125A CR175A CR286A
PCIE PCIe PLL analysis (requires 12GJ, operates at 2.5 G and 5 G only) X X X
PCIE8G PCIe PLL analysis (requires 12GJ, operates at 2.5 G, 5 G, and
8 G only) X X X
HS Add high-sensitivity clock recovery X X
XLBW Add extended loop bandwidth in the clock recovery X X X
12GJ Add jitter spectrum analysis from 1.2 to 11.2 Gb/s
X
17GJ Add jitter spectrum analysis from 1.2 to 11.2 Gb/s
X
28GJ Add jitter spectrum analysis from 1.2 to 11.2 Gb/s
X
Operating requirements
Place the instrument on a cart or bench on the bottom feet or rear feet. Observe the following clearance requirements and
dimensions:
Table 1: Operating requirements
Feature Description
Top 0 mm (0 in)
Left and right sides 76 mm (3 in)
Bottom 0 mm (0 in) standing on feet, fl ip stands down
Rear 0 mm (0 in) on rear feet
Width 394 mm (15.5 in)
Height 220 mm (8.7 in)
Before operating the instrument, verify the ambient temperature: +10° C to +40 °C (+41 °F to +113 °F).
2 CR125A, CR175A, CR286A Quick Start User Manual