Operation
Rear panel connectors
Refer to the following illustration and table for information on the rear panel connectors.
Figure 3: Rear panel connectors
Connectors/controls
Description
1
Chassis ground
Use this connector to connect a common ground to other instruments.
2
AC Power
Connect with a suitable power cable to match the local power outlet type.
3
USB IN
USB 2.0 type B connector used to interface the instrument for control. When
used with a BERTScope Analyzer, connect to any available USB connector.
The instrument can also be operated standalone with an external PC. When
operated in this mode, connect the USB connector to an available USB
connector in the PC. The BERTScopePC software must be installed on the
PC to support standalone operation.
4
USB HUB OUT
Use these USB connectors to connect to other instruments in the system with
USB cables.
5
RS232
Miniature type D connector for standard RS232 communication
CR125A, CR175A, CR286A Quick Start User Manual
9
Summary of Contents for BERTScope
