Product Description
the trace intensity or the readout intensity.
Pressing the BEAMFIND switch compresses the CRT viewing area
such that a signal will be located inside the crt area. Adjusting
the vertical POSITION and the horizontal POSITION control will
situate the signal on the screen.
The FOCUS control adjusts the trace for optimum display defini
tion .
To remove a m enu from the display, you simply press the CLEAR
MENU switch.
The five bezel buttons can be used to make selections in a menu
or to select a sub-menu.
Vertical System
The 2216 oscilloscope has four fully featured vertical channels
(see Figure 1-2) with calibrated deflection factors (VOLTS/DIV)
from. 1 mV to 10 V per division. All vertical channels can be se
lected separately w ith the CHI, 2, 3, 4 channel switches. One
vertical channel at a time can be made the active channel and can
be operated by the following controls:
The CH/REF OFF switch turns off the active channel or the
active reference.
The vertical POSITION control positions the display of the
active channel.
-
The INVERT switch inverts the signal of the active chan
nel.
The AC-GND-DC switch selects the input coupling mode of
the active channel.
-
The 10 MHz bandwidth limit switch; The bandw idth of
the active channel will be limited to ±10 MHz.
At 1 mV/DIV and 2 mV/DIV the analog bandw idth is al
ways approximately 10 MHz, Full bandwidth (60 MHz) is
available from 5 mV to 10 V/DIV,
-
The VAR gain switches. The VARiable VOLTS/DIV gain
control increases or decreases the deflection factor to pro
vide overlapping VOLTS/DIV settings.
1 - 4
Tutorial
Summary of Contents for 2216
