Storage : Function Menus
Limit Test Setup Menu
The 2216 can compare an acquired waveform with an upper and
a lower waveform. The waveform of the active channel is tested.
Reference waveforms can be selected in the Limit Test Setup
Menu to be used as upper and lower waveforms.
You can interprete the ’Limit Test Setup Menu' in this example
as follows:
"DISPLAY the acquired waveform if the status is set to ON,
and A N Y point of the acquired waveform is OUTSIDE the
REFl upper limit, or REF3 lower limit".
Press the
'Limit Testing'
bezel button in the Functions menu to
select the Limit Test Setup Menu (see Figure 3-13).
Limit Test Setup Menu
'
limit testing:
OFF
ON_
act if:
ANY
ALL
points
are:
INSIDE
OUTSIDE limits
upper limit:
1 REFl ]
lower limit:
( REF3}
action:
DISPLAY
STOP
1
Previous
Menu
Figure 3-13: 2216 Limit Test Setup Menu
The parameters of the limits can be defined in the menu by using
the arrow buttons. The following actions can be selected:
- DISPLAY
All acquisitions will be tested but only the ones that meet the
testcondition are displayed.
- STOP
The acquisition is automatically set to STOP when the
testcondition is m et
_ PUTMT
JK* ilpw.JIL4.Yt 4c
All acquisitions that meet the testcondition will automati
cally start the hardcopy task.
Press the
'Previous Menu’
bezel button to select the Storage
Functions Menu again.
3 - 4 2
In Detail
Summary of Contents for 2216
