Using References
Displaying a Reference
To display one or more stored reference-waveform(s), use the fol
lowing procedure:
Step 1.
Press the REFS/MENU button to display the References
Readout (see Figure 1-25).
Step 2.
Select the reference(s) to be displayed on the screen with
the bezel button(s) from the menu.
NOTE
1
.
The last selected reference will become the active
waveform.
2. A maximum o f four references can be
displayed on the screen.
Step 3.
Position the reference(s) horizontally with the Horizontal
POSITION control, and vertically with the Vertical POSI
TION control. The References Position Mode menu de
fines the effect of these controls.
NOTE
The vertical POSITION control does not affect the data
stored in the reference memory
,
but it does set the vertical
position of the reference at the time it is displayed.
Step 4.
To remove an active reference from the screen, press the
CH/REF OFF front panel button
Step 5.
The Reference display can be expanded horizontally
along with the live acquisition display when the horizon
tal display is changed in the Magnify Menu to the 'FIT
TO SCREEN’, xlO or x50 position.
NOTE
You can also display references from the References Menu.
Press therefore SHIFT and REFS/MENU successively to dis
play the REFS Menu. Press the 'Display' bezel button. Select
a reference(s) in the Reference Display Menu.
1 - 5 2
Tutorial
Summary of Contents for 2216
