Step 3.
Check the fuse, located on the rear panel (see Figure ii.) to
be sure it is of the proper type and rating.
This instrument can be damaged i f the wrong line
fuse is installed.
Step 4.
Connect the proper power cord from the rear-panel power
connector to the power system (see Figure ii).
Figure iii: Partial 2216 Front Panel Controls Used at
Start-up
Step 5.
Press the POWER button. Observe that the POWER-ON
indicator, located above the button, comes on (see Figure
iii). After a few seconds a trace appears on the CRT
screen, and the instrument is ready to make measure
ments.
Step 6.
Press the Setup AUTO switch to obtain an optimized dis
play that fits on the screen.
Start-up
Summary of Contents for 2216
