Tektronix 1760 series, User Manual

Page: 40 / 180

At A Glance
1760 Series Component Waveform/Vector Monitor User Manual
2-2
H
Depress and hold the
CLEAR MENU
and
WAVEFORM
buttons while you turn instrument power on again.
Hold both buttons in until the instrument returns to
its normal operating state.
H
If this reset does not unlock the controls, contact
your Tektronix field office or call Tektronix at the
phone number listed in the front of this manual.
Multi-use Controls
H
The center three controls located under the
CRT
have
functions assigned and labeled through the on-
screen menus and readouts. These controls will be
referred to as
Bezel Controls
. See Figure 2-1.
H
Five small buttons along the right side of the
CRT
enable users to make selections from on-screen
menus. These buttons will be referred to as
Bezel
Buttons
.
VERTPOS HORIZPOS
Three Bezel Controls
CLEAR
MENU
Five
Bezel
Buttons
Figure 2-1.
Multi-Use Bezel Controls and Buttons.