Tektronix 1760 series, User Manual

Page: 143 / 180

Appendix A: Performance Specification
A-15
1760 Series Component Waveform/Vector Monitor User Manual
Certifications and Compliances
Table A- 19: Certifications and compliances
CATEGORY STANDARDS OR DESCRIPTION
EC Declaration of
Conformity -- EMC
1
Meets intent of Directive 89/336/EEC for Electromagnetic
Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European
Union:
EN 50081-1 Emissions:
EN 55022 Class B Radiated and Conducted Emissions
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge Immunity
IEC 801-3 RF Electromagnetic Field Immunity
IEC 801-4 Electrical Fast Transient/Burst Immunity
1
High-quality shielded cables must be used to ensure
compliance to the above listed standards. This product
complies when installed into any of the following Tektronix
instrument enclosures:
1700F00 Standard Cabinet
1700F02 Portable Cabinet
1700F05 Rack Adaptor
Australia/New Zealand
Declaration of
Conformity -- EMC Complies with EMC provision of Radiocommunications Act
per the following standard(s):
AS/NZS 2064.1/2 Industrial, Scientific, and Medical
Equipment:1992
AS/NZS 3548 Information Technology Equipment: 1995
FCC Compliance Emissions comply with FCC Code of Federal Regulations 47, Part
15, Subpart B, Class A Limits.
Installation
(Overvoltage)
Category Terminals on this product may have different installation
(overvoltage) category designations. The installation categories
are:
CAT III Distribution-level mains (usually permanently
connected). Equipment at this level is typically in a fixed
industrial location.
CAT II Local-level mains (wall sockets). Equipment at this level
includes appliances, portable tools, and similar
products. Equipment is usually cord-connected.