Troubleshooting
TLA 711 Color Benchtop Controller Service Manual
6–41
Adjustment After Repair
After the removal and replacement of a circuit board or assembly due to failure,
locate the circuit board or assembly removed in Table 6–10 and perform the
indicated procedures. The adjustment and calibration/certification procedures are
found in the TLA 700 Series Performance Verification and Adjustment
Procedures manual.
Table 6–10: Requirements after replacement
Board replaced
Adjustment required
Verification checks
Controller board
CLK 10 Time base accuracy
verification/recertification
Refer to the TLA 700 Series
Performance Verification and
Adjustment Procedures
manual.
Adapter board
None required
Run QAPlus/WIN
Hard disk drive
See note below
None required
See note below
Run QAPlus/WIN
Floppy disk drive
None required
Run QAPlus/WIN
Memory SIMMs
None required
Run QAPlus/WIN
NOTE
. If the hard disk drive is replaced, all of the software must be reloaded with
the backup media supplied with your logic analyzer. The hard disk drive listed in
the replaceable part section does not come with any software preloaded on it.
Refer to the TLA 700 Series Logic Analyzer Installation Manual for more
information on loading software.
Summary of Contents for 070-9778-03
