Tektronix 070-9778-03, Service Manual

Page: 62 / 119

Maintenance
6–10
TLA 711 Color Benchtop Controller Service Manual
Left Side Cover and Rear Panel
You will need a T-9 Torx tip driver (Table 6–3, item 1) to remove the left side
cover.
Rear panel
Chassis
Module cover
Remove screws (8)
Figure 6–2: Removal and installation of the left side cover and rear panel
To remove the left side cover and rear panel, refer to Figure 6–2 and follow these
steps:
1. Remove the six pan head screws from the top and bottom of the enclosure.
Remove the two screws from the rear panel.
2. Remove the rear panel.
3. Remove the left side cover.
Removal