@
Operating Instructions-60S
THIS INSTRUMENT. IN WltOU OR IN PMT.
MAY
B£
PROTECTED BY ONE OR MORE
us.
OR fOREIGN PATENTS OR PArENT APPtICA
liONS INfORMATION PIIOVlOEO ON
R!QUEST
BY
[£KTRONIX, INC. PO BOX 500,
8EAVERTON, ORfGON
17077
608
MONITOR
INPUTS NOT FOR
DIRECT PATIENT
CONNECTION
(SEE MANUAL)
X
INPUT
MAX
INPUT
! 25V
ISEE MANUAL)
- 0
Y
INPUT
FOR CON TINUED PROTECTION
AGAINS T FIRE HA ZARD,
REPLA CE ONLY WITH SA ME
TYPE A ND RA TING OF FUSE
ELEC TRIC SHOCK HA ZA RD
DO NOT REMOVE THIS COVER
OR CABINET COVERS. REFER
SER VICING TO QUALIFIED
SER VICE PERSONNEL
+
3
MAX
INPUT
TO CHANGE LINE VOL TAGE
REFER TO MANUA L
WATTS(MAX) 61
AMPS(MAX) 0.7
AT 60Hz
LINE FUSE
120V: O.SA SLOW SLOW
240V: O.4A SLOW BLOW
n
PRIMARY TAPS SET F�R
CD
TRACE ROTATION-Adjustment to align the trace with the horizontal axis.
! 25V
,SEE MANUAll
-0
4
t
25V
(SEE MANUAL)
-0
+X INPUT
-BNC
input connector to allow application of input signals.
A
positive signal applied
deflects beam to the right; a negative signal deflects beam to the left.
+Y
I NPUT
-BNC
input connector.
A
positive signal applied deflects beam up; a neg ative sig nal
deflects beam down.
+Z INPUT
-BNC
input connector.
A
positive sig nal applied provides a linear function to increase crt
brig htness; a negative signal decreases crt brig htness.
LINE FUSE-120
V:
0.8
A SLOW;
220
V:
0.4
A SLOW.
(Line fuse is internal for Option 6
instruments.)*
.. Refer qualified service personnel to the servicing information sections of the
608
Instruction Manual for further
information.
'
2305-2
Figure
2-2.
Rear-panel controls and connectors.
2-3
