Characteristic
Crosstalk Between
X
and Y Amplifiers
At 500 kHz
At 5 MHz
Useful I nput Voltage Range (+Z I NPUT)
Useful Frequency Range
Rise Time
Noise
Input RC
TABLE
1-1
(CONT.)
Electrical Characteristics
Gene
r
al lnfo
r
mation
-
608
Performance Requirement
0.25 mm, or less, of deflection on the grounded channel
(X
or Y) with a 1 V signal applied on the other channel
(Y or
X).
0.38 mm, or less, of deflection on the grounded channel
(X
or Y) with a 1 V signal applied on the other channel
(Y or
X).
Z-AXI S AMPLIFI ER
Adjustable. With Z Gain at maximum, no more than +1 V
will provide full intensity. With Z Gain at minimum, at
least +5
V
is required to produce full intensity. (-1 V input
signal cuts off visible intensity. )
Dc to at least 10 MHz at -3 dB point.
35 ns or less.
No visible intensity modulation with Z INPUT terminated
into 1 kO or less.
1 MO, within 1
%,
paralleled by 60 pF or less.
Maximum Nondestructive Input Voltage (Fault
+100 V or -100 V (dc + peak ac) with crt beam positioned
Condition Only)
off the viewing area.
Crosstalk Between Z-Axis Amplifier and X or Y Amplifier
O to 500 kHz
0.25 mm or less, with X and Y INPUTS grounded and a 1 V
signal applied to the Z-Axis Amplifier. (Z-Axis Gain set for
maximum.)
500 kHz to 5 MHz
0.38 mm or less, with X and Y I NPUTS grounded and a
1 V signal applied to the Z-Axis Amplifi er. (Z-Axis Gain
set at minimum.)
Light Output
Linear function of Z-Axis input voltage
(Opti on 24 only)
between
2%
an d 100% of maximum brightness,
±200f0
of maximum brightness.
CAT H O D E-RAY TUB E D ISPLAY
Usable Screen Are
a
9.8 X 12.2 centimeters.
Quality Area
9 X 11 centimeters.
Geometry (Within Graticule Area)
Bowing or tilt is 0.1 division or less.
Orthogonality (Within Graticule Area)
90° within 0.7°.
Accelerating Potential
22.5 kV.
Phosphor
P31 standard.
Deflection
Electrostatic.
REV
A,
NOV 1978
1-3
