16. Locate the plug on the top of the water pump roughly on centre the engine shown in the
previous photo
. Take the 3/8NPT x 3/8” barb
straight fitting and screw it into the open port.
This is the SUCTION fitting.
17. Locate the hoses on the left rear of the cab, the PRESSURE hose is the one that is nearest to
the rear window glass. Route the hoses underneath the hood and into the engine bay. Use zip
ties to attach the hoses to the tractor to prevent the hose from contacting moving parts on the
engine. Cut the hose and then connect it to the pressure fitting. Use zip ties to tidy up the
hose. Use the provided HS-6 hose clamps to secure the hose to the fitting.
18. Route the other hose to the suction fitting, ensuring that it does not interfere with any
moving parts. Cut any excess length, and connect to the suction fitting with the provided HS-6
hose clamps.
June 2021© New Holland G6030/6035 ROPS Cab Installation Manual
