BUILT-IN SYMBIOS SCSI BIOS
BUILT-IN SYMBIOS SCSI BIOS
User’s Manual
User’s Manual
43
43
Main Menu
MAIN MENU
Port
Irq
----------Status---------
NvRAM
Num
Level
Current
Next-Boot
Found
SYM53C860
FC00
9
On
On
Yes
SYM53C820
0
0
Off
Off
?
SYM53C825
FD00
9
On
On
Yes
SYM53C815
FE00
10
On
On
No
Change Adapter Status
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Terse
Mono/Color
Language
Help
Quit
You can select an adapter only if the current status is “On”.
Changes are only possible
with SCSI adapters that support NVRAM (non-volatile memory)
. Check the “NvRAM
Found” column to see if NVRAM is present on your adapter. If you choose to alter any of
these settings, exit via the
Quit
option and the system will reboot.
Change Adapter Status -
Allows you to activate or deactivate a host adapter and all SCSI
devices attached to it. The change takes place after a reboot, which is automatic upon exit
from the utility when this option is changed.
Adapter Boot Order -
Allows you to set the order in which host adapters will boot when
more than one Symbios host adapter is present in the system. To change an adapter’s boot
order, select it and press <Enter>. You are then prompted to enter the new boot sequence
number. When the adapters are ordered properly, press the <Esc> key to exit this menu.
Boot Order
Port
Irq
----------Status---------
NvRAM
Num
Level
Current
Next-Boot
Found
SYM53C860
FC00
9
On
On
Yes
SYM53C820
0
0
Off
Off
?
SYM53C825
FD00
9
On
On
Yes
SYM53C815
FE00
10
On
On
No
Display Mode -
Determines how much information about your host adapters and SCSI
devices is displayed on your computer monitor during boot:
•
verbose:
for more complete information
•
terse
: for a faster boot
