MAINBOARD BIOS SETUP
MAINBOARD BIOS SETUP
User’s Manual
User’s Manual
34
34
This Setup Menu provides configuration options for the PCI Bus and its assigned resources.
PNP OS Installed
: No
Slot 1 Use IRQ No.
: Auto
Resources Controlled by
: Manual
Slot 2 Use IRQ No.
: Auto
Reset Configuration Data
: Enabled
Slot 3 Use IRQ No.
: Auto
Slot 4 Use IRQ No.
: Auto
IRQ-3 assigned to
: PCI/ISA PnP
IRQ-4 assigned to
: PCI/ISA PnP
SYMBIOS SCSI BIOS
: Auto
IRQ-5 assigned to
: PCI/ISA PnP
PCI Latency Timer
: 80 PCI Clocks
IRQ-7 assigned to
: PCI/ISA PnP
Assign IRQ For USB
: Enabled
IRQ- 9 assigned to
: PCI/ISA PnP
Used MEM base addr
: N/A
IRQ-10 assigned to
: PCI/ISA PnP
IRQ-11 assigned to
: PCI/ISA PnP
IRQ-12 assigned to
: PCI/ISA PnP
IRQ-14 assigned to
: PCI/ISA PnP
IRQ-15 assigned to
: PCI/ISA PnP
DMA-0 assigned to
: PCI/ISA PnP
DMA-1 assigned to
: PCI/ISA PnP
ESC : Quit
↑
↓
→
←
: Select Item
DMA-3 assigned to
: PCI/ISA PnP
F1 : Help PU/PD/+/- : Modify
DMA-5 assigned to
: PCI/ISA PnP
F5 : Old Values (Shift) F2 : Color
DMA-6 assigned to
: PCI/ISA PnP
F6 : Load BIOS Defaults
DMA-7 assigned to
: PCI/ISA PnP
F7 : Load Setup Defaults
PNP OS Installed
-
Set to Yes if your operating system supports Plug & Play, such as
Windows
95.
Resources Controlled By
-
The Award Plug and Play BIOS has the capacity to
automatically configure all of the boot and Plug and Play compatible devices. This
capability is specifically designed for a Plug and Play operating system such as Windows
95. Choices are
Auto
and
Manual
(default).
Reset Configuration Data
- Reset Configuration Data: When set to Enabled, ESCD
(Extended System Configuration Data) is cleared. This setting will automatically be set
back to Disabled when the system reboots.
Enabled
(default) and
Disabled
.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
-
By default, all resources are
assigned to the PCI Bus except IRQs 3, and 4. If an ISA card requires a particular IRQ or
DMA channel, those resources should be set to Legacy ISA so that the PCI Bus will not try
to use them. Choices are
Legacy ISA
and
PCI/ISA PnP
.
Slot 1/2/3/4 Use IRQ No.
– By default, an IRQ is automatically assigned to PCI slots 1, 2, 3
and 4. You may also specify an IRQ for these slots.
SYMBIOS SCSI BIOS -
When set to
Auto
(Default), the system will automatically sense
the presence of any SCSI adapter that uses a Symbios SYM53C8XX SCSI chip:
