MAINBOARD BIOS SETUP
MAINBOARD BIOS SETUP
User’s Manual
User’s Manual
41
41
PREFORMAT
-
Interleave
- Select the interleave number of the hard disk drive you wish
to perform low level format. You may select from 1 to 8. Check the documentation that
came with the drive for the correct interleave number, or select 0 for utility automatic
detection.
Auto Scan Bad Track
- This allows the utility to scan for bad sectors first then format by
each track.
Start
- Press <Y> to start low level format.
Save & Exit Setup / Exit Without Saving
Select
Save & Exit Setup
to save into the CMOS memory all modifications specified during
the current session. To save the configuration changes, highlight this option in the main
menu and press [ENTER]. The system displays a confirmation message on the screen. Press
the “Y” key and then [Enter]. Press the “N” key and then the [Enter] key to abort. The
Exit
Without Saving
option allows the user to exit the BIOS Setup without updating any changes
made during the current session.
PCI Device Listing
This list of installed PCI devices appears after the
System Configuration
screen:
PCI device listing .....
Bus No. Device No. Func No. Vendor ID Device ID Device Class IRQ
0 7 1 8086 7111 IDE Controller
14/15
0 7 2 8086 7112 Serial bus controller 11
0 9 0 1013 7333 Display controller NA
Bus No.
Encoded value indicating 1 of 256 possible buses in a system.
Device No.
Encoded value indicating 1 of 32 possible devices on a given bus.
Func No.
Encoded value indicating 1 of 8 possible functions on a multifunction
device.
Vendor ID
Identifies the manufacturer of the device. Valid vendor identifiers are
allocated by the PCI SIG (Special Interest Group) to ensure uniqueness.
Device ID
Identifies the particular device. This identifier is allocated by the vendor.
Device Class
Specifies one of the following device classes: Mass storage controller,
Network controller, Display controller, Multimedia device, Bridge device,
Simple communication controller, Base system peripherals, Input device,
Docking station, Processor and Serial bus controller.
The PCI device listing is useful for troubleshooting purposes. More detailed information for
each field may be obtained through the PCI specification documentation.